Bollards ELECTR@

Acces control and management

BORNE ELECTR@

High resistance access control bollard for public or private roads

High resistance: 370Kj, equivalent to a 1.5T vehicle travelling at 80km/h
Very intensive operation and silent electric motor
Compatible with civil engineering from the MÉTROPOLE range (H: 500mm and 600mm)
Options available
Very low and easy maintenance
- Engine removal from the top (no bollard removal needed)
- Removal finish lining that can be replaced in minutes

borne-controle-acces-electra-en.pdf

(pdf 1,856.21 Ko)

Bollard
- Heights : 530/600/800mm, Ø 273mm
- S355 high-strength steel structure, 10mm thick, hot-dip galvanised and 2mm stainless steel lining
- External finish with 304L stainless steel lining painted to match RAL or AKZO NOBEL colour or brushed 316L stainless lining
- Reflective tape at the top
Frame structure under the roadway
- Dimensions 478 x 478mm
- Height: 837 to 1,314mm depending on height of bollard head
- S355 high-strength steel structure, 6mm thick and S355 steel guide plate, 20mm thick, hot-dip galvanised treatment
- Sockets for lifting rings
- 6/8mm tread plate anti-slip floor plate in sandblasted black 900
- Installation with or without lost casing
Resistance
- Resistance to 370 Kj, i.e 1.5T at 80km/h : Transpolis laboratory certificate available upon request
Motor drive
- 230VAC low-voltage fixed-speed electric motor drive
- Ascent time 4s to 7s (depending on height), descent time < 5s
- IP67 protection rating
- Very high-strength straps
- Positive safety (bollard smoothly descends under its own weight)
- Detection of top and bottom position using inductive sensors
- 20ml cable kit

Illuminated bollard cap (red or white LEDs)
Shock sensor to transfer information to access control GENCARD WEB® software system
Maintenance tool Kit
40ml cable kit (other lengths on request)
Negative safety Kit on mains failure ( bollard held at the to)*
Heating bollard Kit

Mobilier de contrôle d’accès modulaire et évolutif permettant l’intégration de divers équipements.