SIGNALIT SPHINX
Two-component cold plastic for sealing aggregates (decorative gravel resin) to create decorative or functional coatings (walkways, bus lanes, roundabouts, speed reduction zones, etc.).
ADVANTAGES SIGNALIT SPHINX
- Excellent adhesion to all road surfaces.
- Fluid adhesive for good application performance.
- Solvent-free and odourless coating for user comfort.
DOCUMENTS
CONDITIONS FOR USE
- Application
On clean, dry ground. Mark out the area to be coated using adhesive tape. Mix the coating and hardener. Apply evenly with a trowel and immediately sprinkle with aggregates. Tamp down lightly, then once the coating has completely polymerised sweep away any excess. Remove the adhesive tape after application. Use aggregates with a diameter of less than 2 mm for traffic areas and aggregates with a diameter of up to 5 mm for decorative coatings. - Primer
On dusty, absorbent surfaces or new bituminous coatings, it is recommended to apply the EP-Primer. - Thinner
Use a maximum of 1% VG55 thinner. - Ground temperature limits & Maximum hydrometry
10°C<T<40°C, maximum hydrometry of 80% - Cleaning
Use Veluvine VG44 or VG40 thinners. - Storage
The product can be stored for 6 months in its original packaging, away from sunlight and frost. The reference date is the date of manufacture printed on the packaging.
TECHNICAL CHARACTERISTICS
- Colours : Natural sand
Other colours available on request: Traffic yellow RAL 1023, Safety red RAL 3001, Light blue RAL 5012, Traffic green RAL 6024, Traffic grey RAL 7042 and Safety black RAL 9004. - Viscosity : Thick and liquid: approx. 105 KU
- Density : approx. 1.8 g/cm³
- Mixing ratio :
2 × 115-gram bags of Noviper BP-30 or 2 × 100-gram bags of Avox L40S for 18 kg of Signalit Sphinx
3 × 115-gram bags of Noviper BP-30 or 3 × 100-gram bags of Avox L40S for 24 kg of Signalit Sphinx - Curing time :
20 minutes at 30°C
35 minutes at 20°C
45 minutes at 10°C - Flashpoint : approx. 10°C
- Application : Manual