Hot-applied coatings THERMOLIT G17

• Excellent durability: certified marking for more than 2 million roll-over • High whiteness marking ensuring very good visibility • High level of adhesion guaranteeing non-slip marking • Zero packaging waste thanks to the hot-melt bag

• Application Heat up the meltable bags to an average temperature of 180° (min 165°C - max 200°C), to obtain a fluid paste before applying. Immediately apply the drop-on glass beads. • Support On a dry surface free of dirt. Use a primer (Thermolit Primer AF) on the old markings. Fresh concrete (< 1 year) must be sanded and covered with a primer (Primer Veluvine EP). For concrete more than a year old, the primer alone will be sufficient. • Ground temperature limits & Maximum hydrometry Between 5 and 45°C and at least 3°C above the dew point, with relative humidity < 80%. Application temperatures that are too low can result in insufficient adhesion. • Storage Protected from sunlight and frost, the paint will keep for 24 months in its original packaging. The reference is the manufacturing date on the packaging.

• Colours White • Luminance ≥ 0.80 compliant with standard EN 1871 class LF6 ≥ 0.40 compliant with standard EN1436 class B3 • Night visibility ≥ 200 mcd.m2.lx1 compliant with standard EN1436 class R4 • Skid resistance ≥ 55 SRT compliant with EN 1436 class S3 • Application temperature ≥ 95°C compliant with standard EN 1871 class SP3 • Specific Gravity env. 2,0 g/cm3 • Viscosity Fixed at 20°C, hardening at a temperature of 175°C. • Solid content 100°C • Curing time env. 2 minutes • Flashpoint < 230°C • Application Melter-mixer and thermo machine equipped with an extrusion shoe Manual using a shoe or spatula • Remark The KOMO K95758 certificate was issued on the basis of a road test according to EN1436 & 1824 standards and an assessment of the VELUVINE quality system by KIWA in accordance with the BRL 9141/03 standard for road marking products. The CE certificate was issued based on an ongoing test in accordance with Regulation (EU) No. 305/2011 under the supervision of 1219 - Instituto de Ciencias de la Construcción Eduardo Torroja (IETcc-CSIC).