THERMOLIT G17
Thermoplastic type I with high adhesion and high retroreflectivity for optimal day and night visibility.
ADVANTAGES THERMOLIT G17
- Excellent durability: certified marking for more than 2 million roll-overs.
- High whiteness marking ensuring very good visibility.
- High level of adhesion guaranteeing non-slip marking.
- Zero packaging waste thanks to the hot-melt bag.
DOCUMENTS
CONDITIONS FOR USE
- Application
Heat up the meltable bags to an average temperature of 180° (min 165°C - max 200°C), to obtain a fluid paste before applying. Immediately apply the drop-on glass beads. - Support
On a dry surface free of dirt. Use a primer (Thermolit Primer AF) on the old markings. Fresh concrete (< 1 year) must be sanded and covered with a primer (Primer Veluvine EP). For concrete more than a year old, the primer alone will be sufficient. - Ground temperature limits & Maximum hydrometry
Between 5 and 45°C and at least 3°C above the dew point, with relative humidity < 80%. Application temperatures that are too low can result in insufficient adhesion. - Storage
Protected from sunlight and frost, the paint will keep for 24 months in its original packaging. The reference is the manufacturing date on the packaging.
TECHNICAL CHARACTERISTICS
- Colours White
- Luminance ≥ 0.80 compliant with standard EN 1871 class LF6 ≥ 0.40 compliant with standard EN1436 class B3
- Night visibility ≥ 200 mcd.m2.lx1 compliant with standard EN1436 class R4
- Skid resistance ≥ 55 SRT compliant with EN 1436 class S3
- Application temperature ≥ 95°C compliant with standard EN 1871 class SP3
- Specific Gravity env. 2,0 g/cm3
- Viscosity
Fixed at 20°C, hardening at a temperature of 175°C. - Solid content 100°C
- Curing time env. 2 minutes
- Flashpoint < 230°C
- Application
Melter-mixer and thermo machine equipped with an extrusion shoe Manual using a shoe or spatula - Remark
The KOMO K95758 certificate was issued on the basis of a road test according to EN1436 & 1824 standards and an assessment of the VELUVINE quality system by KIWA in accordance with the BRL 9141/03 standard for road marking products. The CE certificate was issued based on an ongoing test in accordance with Regulation (EU) No. 305/2011 under the supervision of 1219 - Instituto de Ciencias de la Construcción Eduardo Torroja (IETcc-CSIC).
SOLUTIONS ASSOCIÉES
Matériaux de saupoudrage MICROBILLES CLASSIQUES
Microbilles de verre qui permettent aux produits de marquages routiers d’être visibles de nuit, en renvoyant vers les conducteurs la lumière des phares des véhicules.